|
Tuesday, 16 February 2010 |
We are happy to introduce various new products for the Velox V8 and the Velox V10. For the Velox V10 a full set of shock absorber springs is available now. The light green standard springs are included in the kit, the darkgreen springs are a little bit harder, the grey springs are a little bit softer. This allows to fine-tune the V10 accordingly to different tracks.
 |
#811508 Rear green - V10 medium
#811509 Front green - V10 medium
#811516 Rear grey - V10 soft
#811517 Front grey - V10 soft
#811518 Rear darkgreen - V10 hard
#811519 Front darkgreen - V10 hard
#811530 Spring set V10 rear
#811540 Spring set V10 front
|
Also new are the softer floating piston springs that are available for the Velox V10 and the Velox V8. They create less rebound for an overall softer shock absorber setup by having more coils compared to the standard one.
 |
#811305
Springs floating piston hard
#811315 Springs floating piston soft
|
As many drivers requested a harder servo saver spring for the V10 for high grip conditions this spring is now available as an optional part. Still protecting the servo from being damaged it offers more pressure on the servo saver.
 |
#407305
Spring servos saver
#507305 Spring servo saver hard
|
The existing range of pinions for the Velox V10 Competion Clutch is now completed by a 16T pinion for the first gear. This suits very small tracks where a lot of power from the bottom is needed. Already available for a while are 17T and 18T pinions for the first gear and 21T, 22T and 23T for the second gear.
 |
#410516 Pinion 1st gear 16T
#410517 Pinion 1st gear 17T
#410518 Pinion 1st gear 18T
#410521 Pinion 2nd gear 21T
#410522 Pinion 2nd gear 22T
#410523 Pinion 2nd gear 23T
|
To adjust the off-set at the Velox V8 several shims are needed. We extend the already existing range of shims by a new 12x16x05mm shim. They are preferably used with 12x18x5mm bearings so they don't touch the outer ballbearing ring.
 |
#751216 Adjusting shims 12x16x0,1
#751218 Adjusting shims 12x18x0,3
#752165 Adjusting shims 12x16x0,5
|
We created a new decal sheet for the Velox V8. These new decals are available seperately from now on and sport the "Velox V8" logo and the ram-head in different sizes.
 |
#400060 Decals V10 (125x232mm)
#600060 Decals V8 (230x330mm)
#600061 Decals V8 '10 (125x232mm)
#900060 Decals Shepherd blue (125x232mm)
#900061 Decals Shepherd red (125x232mm)
#900062 Decals Shepherd white (125x232mm)
|
|
