Home  Tech area Velox V10
|
|
Monday, 07 December 2009 |
Welcome to our Velox V10 tech area
In this area you can find further information about he Velox V10.
So you will find any information about the assembly, the adjustment
an upcoming news about the car.
Tech Info 1
-Shock absorber length
We forgot to tell you the default length of the shocks in the instruction
manual.
For the shock assembly there are the following length are valid
Shock absorber front > 69,5mm
Shock absorber rear > 74,0mm
Tech Info 2
-Radioplatemount rear
For the first shipped kits we had some "bad" radioplatemounts, Itemnumber 405502.
This shipped parts are already machined for better fitting, but we were not satisfied
with that.
Now there is a new version available, we changed not that much, but now it fits
perfect and the radioplate can be mounted planar.
If you have one of the first kits, and you have one of the bad ones, you can order
a replacement part from your local dealer.
Below you can see the first version on the left side and the replacement part at
the right side.
Tech Info 3
-Belt tension excenter front
Caused by some production tolerances the front belt tension excenters can be a little
bit to big. In this case the front wishbones can not move freely.
To solve this problem just cut a little bit at the front end of the excenter.
Do not cut to much, you can use a file or some sandpaper.
|
|
